Husqvarna Z246
or
Call (914) 738-4400
Specifications
| Manufacturer | Husqvarna |
| Condition | New |
| Cutting width | 46 in |
| Speed forward min | 0 mph |
| Speed forward max | 6.5 mph |
| Exhaust emissions (CO₂ EU V)2 | 830.04 g/kWh |
| Cutting Methods (filter) | Collecting, Mulching, Side discharge |
| Cutting methods | Collect/Mulch/Side discharge |
| Deck thickness | 13 gauge |
| Deck Wash Port | Yes |
| Greasable mandrels | No |
| Nose roller | No |
| Cutting deck surface treatment | Powder coated |
| Spindle/mandrel type | Cast Aluminum |
| Deck lifting system | Manual, hand operated |
| Cutting height steps | 6 |
| Cutting deck type | Stamped, Reinforced |
| Anti-scalp wheels | 2 |
| Blade engagement | Electric clutch |
| Blades | 2 pcs |
| Cutting deck material | Steel |
| Cutting height, min (approximate) | 1.5 in |
| Cutting height, max (approximate) | 4 in |
| Weight | 537 lbs |
| Base machine, height (ROPS down) | 40 in |
| Base machine, height (ROPS up) | 40 in |
| Base machine, height | 40 in |
| Base machine, length | 75 in |
| Base machine, width (chute down) | 52 in |
| Base machine, width (chute up) | 48 in |
| Transmission Brand | Hydro-Gear |
| Transmission type | Hydrostatic |
| Engine name | EXi |
| Engine brand | Briggs & Stratton |
| Engine Power (As rated by the engine manufacturer)1 | 22 hp |
| Cylinder displacement | 44.3 cu.inch |
| Fuel tank volume | 13.25 l |
| Air filter type | Auto-type Paper |
| Cylinders | 2 |
| Engine cooling | Air |
| Engine lubrication type | Full pressure with oil filter |
| Fuel tank location | Side (Single) |
| Fuel tank volume (with reserve) | 3.5 gal (US) |
| Motor/engine manufacturer | Briggs & Stratton |
| Oil filter | Yes |
| Seat type | 15" high back |
| Cup holder | Yes |
| Hinged armrests | Optional |
| Hour meter type | Digital with pre-programmed service intervals |
| ROPS | No |
| Seat back height | High |
| Seat material | Vinyl |
| Connectivity | Not applicable |